RTH-Process
Smart RTH
1. Home point is set (usually the takeoff position)
2. RTH is triggered.
3. Aircraft will spin to face the home point.
4. If the aircraft is below, it will ascend to the min RTH altitude as set in
the app.
a. If the aircraft is within 5m of the home point, it will land directly
below.
b. If the aircraft is between 5-20m horizontally from the home
point, the aircraft will fly to the home point at the current altitude
(min 5m) before landing.
5. AI Search for Landing Pad will result in a more precise RTH.
Low Battery RTH
Failsafe RTH
The aircraft will intelligently calculate when to return home, based on flight
distance and remaining battery life. At this point, it will send an alert in the
app and can be manually cancelled.
If the aircraft battery power percentage is lower than 10%, the aircraft will
start landing automatically at that point. This can be also be cancelled.
If the battery is below 1%, the aircraft will be forced to land directly below and
cannot be cancelled.
See “Battery Struggle Mode” for tips for safe return on extremely low battery.
If the aircrtaft loses connection with the remote for more than 5 seconds, it
will automatically trigger RTH.
If the aircraft reconnects while returning home, it will continue the automatic
RTH, however it can be cancelled in the app.
Use the “Release payload if the aircraft is disconnected” setting (Settings >
Aircraft) to automatically release the payload if the aircraft is disconnected.
This will increase flight time and maximise chances of a safe return.
Trigger RTH by pressing the button for 2 seconds on the remote, or in
the app interface.
36
To Next Page