Agilent Technologies 33250A User Manual

261
Chapter 5 Error Messages
Execution Errors
4
5
-222 Data out of range;
value clipped to upper limit
The specified parameter is outside of the function generator’s capability.
The function generator has adjusted the parameter to the maximum
value allowed. Example: PHAS 1000
-222 Data out of range;
value clipped to lower limit
The specified parameter is outside of the function generator’s capability.
The function generator has adjusted the parameter to the minimum
value allowed. Example: PHAS -1000
-222 Data out of range;
pulse edge time limited by period
The specified edge time must fit within the specified period. The function
generator will adjust the edge time as needed to accommodate the
specified period.
-222 Data out of range;
pulse width limited by period; value clipped to ...
The specified pulse width must be less than the difference between the
period and the edge time as shown below. The function generator will
adjust the pulse width as needed to accommodate the specified period.
Pulse Width <
Period – (1.6 X Edge Time)
-222 Data out of range;
pulse edge time limited by width; value clipped to ...
The specified edge time must fit within the specified pulse width as
shown below. The function generator will adjust the edge time as needed
to accommodate the specified pulse width.
Edge Time <
0.625 X Pulse Width

Agilent Technologies 33250A Specifications

General

Brand	Agilent Technologies
Model	33250A
Category	Inverter
Language	English