13
Contents
Contents
Chapter 1 Quick Start 15
To Prepare the Waveform Generator for Use 17
To Adjust the Carrying Handle 19
To Set the Output Frequency 20
To Set the Output Amplitude 22
To Set a DC Offset Voltage 25
To Set the High-Level and Low-Level Values 27
To Output a DC Voltage 20
To Set the Duty Cycle of a Square Wave 30
To Configure a Pulse Waveform 32
To Select a Stored Arbitrary Waveform 34
To Use the Built-In Help System 33
To Rack Mount the Waveform Generator 38
Chapter 2
Front-Panel Menu Operation 41
Front-Panel Menu Reference 43
To Select the Output Termination 47
To Reset the Waveform Generator 48
To Output a Modulated Waveform 49
To Output an FSK Waveform 51
To Output a PWM Waveform 53
To Output a Frequency Sweep 56
To Output a Burst Waveform 59
To Trigger a Sweep or Burst 62
To Store the Instrument State 63
To Configure the Remote Interface 65
To Set up an Arbitrary Waveform 73
To Next Page
Loading...
Need help?
General
