Agilent Technologies 33500 Series User Manual

191
Chapter 3 Features and Functions
Calibration Overview
3
To Unsecure for Calibration You can unsecure the waveform
generator either from the front panel or over the remote interface.
The waveform generator is secured when shipped from the factory and
the security code is set to “AT33520”.
• Once you enter a security code, that code must be used for both front-
panel and remote operation. For example, if you secure the waveform
generator
from the front panel, you must use that same code to
unsecure it from the remote interface.
• Front-Panel Operation: Press and select Calibrate. Then enter
the security code with the knob and numeric keypad and select
Unlock Cal.
• Remote Interface Operation: To unsecure the waveform generator,
send the following command with the correct security code.
CAL:SECURE:STATE OFF,AT33520A
To Secure Against Calibration You can secure the waveform
generator
either from the front panel or over the remote interface. The
waveform generator is secured when shipped from the factory and the
security code is set to “AT33520A”.
• Once you enter a security code, that code must be used for both front-
panel and remote operation. For example, if you secure the waveform
generator
from the front panel, you must use that same code to
unsecure it from the remote interface.
• Front-Panel Operation: Press and then select Calibrate.
• Remote Interface Operation: To secure the waveform generator,
send the following command with the correct security code.
CAL:SECURE:STATE ON,NEWCALCODE

Agilent Technologies 33500 Series Specifications

General

Brand	Agilent Technologies
Model	33500 Series
Category	Laboratory Equipment
Language	English