Agilent Technologies 5977C Series User Manual

5977C GC/MSD Operating Manual 7
To Install the GC/MSD Interface Tip Seal 74
The GC/MSD Interface for a 9000 Series GC 76
4Operating in EI Mode
Operating the MSD from the DS 79
Configuring the MSD through the Web User Interface
(WUI) 80
To change the network settings of the MSD 80
eModule Mini Display Readout 83
Front Panel Instrument Status LED 84
Before You Turn On the MSD 85
Pumping Down 86
Controlling Temperatures 86
Controlling Column Flow 87
Controlling JetClean Hydrogen Flow 87
Venting the MSD 88
To View MSD Temperature and Vacuum in Manual Tune 89
To Set Monitors for MSD Temperature and Vacuum
Status 91
To Set Analyzer Temperatures from the Instrument Control
View 94
To Set the GC/MSD Interface Temperature from
MassHunter 96
To Monitor High Vacuum Pressure 98
To Tune the MSD in EI Mode 100
To Set the Operation Mode for the Optional JetClean
System 102

Agilent Technologies 5977C Series Specifications

General

Brand	Agilent Technologies
Model	5977C Series
Category	Security Sensors
Language	English