1-34
Installing the 86100C
To connect an external display
To connect an external display
You can connect a VGA-compatible display to the 86100C to provide a larger
viewing area of the screen.
1 Connect the display cable to the rear-panel VGA connector. This connector is
labeled External Display on Figure 1-27.
2 Tighten the retaining screws.
3 Connect the external display.
The rear-panel VGA connector labeled Second Desktop Connection on
Figure 1-27 is provided for use of the Windows second desktop feature. Refer
to Windows XP Help for information on using a second desktop.
Figure 1-27. External Monitor Connector
To Next Page
Loading...
