2-30
Using the 86100C
If the Infiniium DCA has a Problem
in the following figure.
5 To enter the recovery procedure, press the 1 key.
6 On the next screen press C to recover the hard disk. Press E to exit the
procedure.
7 Another screen is displayed giving you one more chance to enter or exit the
procedure. Press C to recover the hard disk. Press E to exit the procedure.
NOTE This is your last chance to abort the recovery process. Once the hard drive
recovery procedure starts, do not interupt the procedure with any key presses.
The procedure requires about 10 minutes to complete.
8 When the "Recovery Process is complete!" message is displayed, press
CLT+ALT+DEL on the keyboard.
9 The Windows XP Setup Wizard automatically starts. Follow the steps listed on
the screen. The Certificate of Authenticity is located on the instrument's rear
panel.
To Next Page
Loading...
Need help?
General
