1-170 Chapter1
Alphabetical Command Reference
PLT
PLT
Syntax
PLTHNDSHK<XON|DTR>; or PLTHNNDSHK<XON|DTR>?;
PLTPRT<DISK|HPIB|PARA|SERI>; or PLTPRT<DISK|HPIB|PARA|SERI>?;
PLTTRAUTF<ON|OFF>; or PLTTRAUTF?;
PLTTRBAUD<num>; or PLTTRBAUD?;
PLTTRFORF;
PLTTYP<HPGL|PLTR>;
Description
Command Description Range Query Response
PLTHNDSHK Selects the plotter handshake mode as
either Xon-Xoff or DTR-DSR.
N/A
<0|1><
L
F
>
1
1. A one is returned for DTR-DSR, and a zero is returned for Xon-Xoff.
PLTPRTDISK Sets the plotter port to disk (either
internal disk or external disk).
N/A
<0|1><
L
F
>
PLTPRTHPIB Sets the plotter port to GPIB. N/A
<0|1><
L
F
>
PLTPRTPARA Sets the plotter port to parallel. N/A
<0|1><
L
F
>
PLTPRTSERI Sets the plotter port to serial. N/A
<0|1><
L
F
>
PLTTRAUTF Turns the plotter auto feed on and off. N/A
<0|1><
L
F
>
PLTTRBAUD Sets the plotter baud rate. Choose from:
1200, 2400,
4800, 9600,
19200
<num><
L
F
>
PLTTRFORF Sends a form feed to the plotter. N/A N/A
PLTTYPHPGL Selects HP-GL compatible printer as the
plotter type.
N/A N/A
PLTTYPPLTR Selects plotter as the plotter type. N/A N/A
To Next Page
Loading...
Need help?
General
