Agilent Technologies 8719ET Programmer's Guide

Chapter 1 1-205
Alphabetical Command Reference
REV
REV
Syntax
REV<I|M|T>;
NOTE These commands only apply to ES models.
Description
These commands are OPC-compatible if there is only one standard in the class. If there is
just one standard, that standard is measured automatically. If there is more than one
standard in the class, the class command only calls another menu.
Front Panel Equivalents
Command Description Range Query Response
REVI Calls the reverse isolation calibration
class during a full 2-port calibration.
N/A N/A
REVM Calls the reverse match calibration class
during a full 2-port calibration.
N/A N/A
REVT Calls the reverse transmission calibration
class during a full 2-port calibration.
N/A N/A
Command Hardkey Softkey
REVI
REVM
REVT
Cal
REV ISOL’N
Cal
REV MATCH
Cal
REV TRANS

Agilent Technologies 8719ET Specifications

General

Brand	Agilent Technologies
Model	8719ET
Category	Measuring Instruments
Language	English