Agilent Technologies 8719ET - Chan

Chapter 1 1-33
Alphabetical Command Reference
CHAN
CHAN
Syntax
CHAN<1|2|3|4>;
Description
NOTE These commands should use OPC? to prevent timing errors with subsequent
commands. Example code written in BASIC:
10 OUTPUT 716;"OPC?;CHAN2;"
20 OUTPUT 716;X
Front Panel Equivalents
Command Description Range Query Response
CHAN1 Makes channel 1 the active channel.
OPC-compatible.
N/A N/A
CHAN2 Makes channel 2 the active channel.
OPC-compatible.
N/A N/A
CHAN3 Makes channel 3 the active channel.
OPC-compatible.
N/A N/A
CHAN4 Makes channel 4 the active channel.
OPC-compatible.
N/A N/A
Command Hardkey Softkey
CHAN1 N/A
CHAN2 N/A
CHAN3 N/A
CHAN4 N/A
Chan 1
Chan 2
Chan 3
Chan 4