Chapter 1 1-223
Alphabetical Command Reference
SEA
SEA
Syntax
SEA<L|R>;
SEA<MAX|MIN|OFF>; or SEA<MAX|MIN|OFF>?;
SEATARG<num>; or SEATARG?;
Description
These commands control the marker searches. The marker searches place the active
marker according to the indicated search criteria. The search is continuously updated if
tracking is ON (see “TRACK”).
Front Panel Equivalents
Command Description Range Query Response
SEAL Search left for next occurrence of the
target value.
N/A N/A
SEAMAX Search for trace maximum on the current
channel.
N/A
<0|1><
L
F
>
SEAMIN Search for trace minimum on the current
channel.
N/A
<0|1><
L
F
>
SEAOFF Turns the marker search off. N/A
<0|1><
L
F
>
SEAR Search right for next occurrence of the
target value.
N/A N/A
SEATARG Set the search target amplitude.
amplitude range
1
1. For log mag: ± 500 dB. For phase: ± 500 degrees. For Smith chart and Polar: ± 500 units.
For linear magnitude: ± 500 units. For SWR: ± 500 units.
<num><
L
F
>
Command Hardkey Softkey
SEAL
SEAMAX
SEAMIN
SEAOFF
SEAR
SEATARG
Marker Search
Marker Search
Marker Search
Marker Search
Marker Search
Marker Search
To Next Page
Loading...
Need help?
General
