Agilent Technologies 8719ET Programmer's Guide

Chapter 5 5-3
Data Processing Chain
Data Arrays
Data Arrays
Figure 5-1 shows the different kinds of data available within the instrument:
• pre-raw measured data
• raw measured data
• error-corrected data
• formatted data
• trace memory
• calibration coefficients
Trace memory can be directly output to a controller with OUTPMEMO;, but it cannot be
directly transmitted back.
Figure 5-1 The Data-Processing Chain For Measurement Outputs

Agilent Technologies 8719ET Specifications

General

Brand	Agilent Technologies
Model	8719ET
Category	Measuring Instruments
Language	English