1-78 Chapter1
Alphabetical Command Reference
ECALPAUSED
ECALPAUSED
Syntax
ECALPAUSED;
Description
Front Panel Equivalents
GPIB only: no front panel equivalent
ECALRERC
Syntax
ECALRERC;
Description
Front Panel Equivalents
Command Description Range Query Response
ECALPAUSED This command is designed to be used in a
polling loop to determine if the ECal
operation is in the pause stage of a
manual thru and a dual module
calibration. Used with the command
“ECALCONT” on page 1-70. Returns the
integer “1” if the ECalis paused or returns
the integer “0” if the ECal is not paused.
N/A N/A
Command Description Range Query Response
ECALRERC
1
1. For ES analyzers, an S
22
/ S
12
enhanced response is performed. This command is not valid with ET analyzers.
Starts an ECal reverse enhanced response
calibration.
N/A N/A
Command Hardkey Softkey
ECALRERC
Cal
To Next Page
Loading...
Need help?
General
