Appendix A A-13
Preset Conditions
Preset State
Table A-12 Sequencing Conditions
Preset Conditions Preset Value
Current Sequence
Pressing turns off sequencing
modify (edit) mode and stops any running
sequence.
Loop Counter 0
TTL OUT High
Table A-13 Service Mode Conditions
Preset Conditions Preset Value
GPIB Diagnostic Off
Source Phase Lock Loop On
Sampler Correction (8753ET/ES only) On
Spur Avoidance (8753ET/ES only) On
Aux Input Resolution Low
Analog Bus Node 11 (Aux Input)
Preset
To Next Page
Loading...
