4-2
Printing, Plotting, and Saving Measurement Results
Using This Chapter
Using This Chapter
This chapter contains instructions for the following tasks:
• Printing or plotting your measurement results
❏ Configuring a print function
❏ Defining a print function
❏ Printing one measurement per page
❏ Printing multiple measurements per page
❏ Configuring a plot function
❏ Defining a plot function
❏ Plotting one measurement per page using a pen plotter
❏ Plotting multiple measurements per page using a pen plotter
❏ Plotting a measurement to disk
❏ To view plot files on a PC
❏ Outputting plot files from a PC to a plotter
❏ Outputting plot files from a PC to an HP-GL compatible printer
❏ Outputting single page plots using a printer
❏ Outputting multiple plots to a single page using a printer
❏ Plotting multiple measurements per page from disk
❏ Titling the displayed measurement
❏ Configuring the analyzer to produce a time stamp
❏ Aborting a print or plot process
❏ Printing or plotting the list values or operating parameters
❏ Solving problems with printing or plotting
• Saving and recalling instrument states
❏ Saving an instrument state
❏ Saving measurement results
❏ Re-saving an instrument state
❏ Deleting a file
❏ Renaming a file
❏ Recalling a file
❏ Formatting a disk
❏ Solving problems with saving or recalling files
To Next Page
