Agilent Technologies E3633A - Page 90

Chapter 4 Remote Interface Reference
Output Setting and Operation Commands
78
VOLTage:RANGe?
This query returns the currently selected range. The returned parameter for
the Agilent E3633A is ‘‘P20V’’ (HIGH) or ‘‘P8V’’ (LOW) and the parameter for
the Agilent E3634A is ‘‘P50V’’ (HIGH) or ‘‘P25V’’ (LOW).
MEASure:CURRent?
This command queries the current measured across the current sense resistor
inside the power supply.
MEASure[:VOLTage]?
This com mand queries the voltage measured at the sense ter mi nals of the
power supply.