To Next Page

To Previous Page

Chapter 4 Remote Interface Reference

SCPI Conformance Information

107

SCPI Conformance Information

The Agilent E3633A and E3634A DC Power Suppl ies conform to the ‘1996.0’

version of the SCPI standard. Many of the commands required by the standard

are accepted by the power supply but are not described in this manual for

simplicity or clarity. Most of these non-documented commands duplicate the

functionality of a command alread y described in this manual.

SCPI Confirmed Commands

The following table lists the SCPI-confirmed commands that are used by the

power supply.

DISPlay

[:WINDow][:STATe] {OFF|ON}

[:WINDow][:STATe]?

[:WINDow]:TEXT[:DATA] <quoted string>

[:WINDow]:TEXT[:DATA]?

[:WINDow]:TEXT:CLEar

INITiate[:IMMediate]

MEASure

:CURRent[:DC]?

[:VOLTage][:DC]?

OUTPut

[:STATe] {OFF|ON}

[:STATE]?

[SOURce]

:CURRent[:LEVel][:IMMediate][:AMPLitude] {<current>|MIN|MAX|UP|DOWN}

:CURRent[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX]

:CURRent[:LEVel][:IMMediate]:STEP[:INCRement] {<numeric value>|DEFault}

:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]? {DEFault}

:CURRent[:LEVel]:TRIGgered[:AMPLitude] {<current>|MIN|MAX}

:CURRent[:LEVel]:TRIGgered[:AMPLitude]?[MIN|MAX]

:CURRent:PROTection[:LEVel] {<current>|MIN|MAX}

:CURRent:PROTection[:LEVel]? {MIN|MAX}

:CURRent:PROTection:STATe {0|1|OFF|ON}

:CURRent:PROTection:STATe?

:CURRent:PROTection:TRIPped?

:CURRent:PROTection:CLEar

Agilent Technologies E3633A Operating Manual

Other manuals for Agilent Technologies E3633A