14
Initial Operation
There are three basic tests in this chapter. The automatic power-on test
includes a self-test that checks the internal microprocessors and allows the
user visuall y to check the display. The output check ensures that the power
supply develops its rated outputs and properly responds to operation from the
front pan el. For complete performance and/or verification tests, refer to the
Service Guide
.
This chapter is intended for both the experienced and the inexperienced user
because it calls attention to certain checks that should be made prior to
operation.
Throughout this chapter the key to be pressed is shown in the left marg in.
To Next Page
Loading...
Need help?
General
