Chapter 6 Application Programs
Example Program for Excel 97
127
6
Example Program for Excel 97
This section contains the example program written using Excel Macros (
Visual
Basic
®
for Appli cation s
) to control your Agilent E3633A or Agilent E3634A.
With Excel you can take the value of a cell in a spread sheet, send it to the
power supply, and then record the response on the worksheet. The example
on the following pages characterizes a component across the terminals of the
power supply. This example reads 11 voltages from a worksheet, programs
the power supply to that voltage, and then reads the current. The value of
current is recorded next to the voltage on the spread sheet.
Example
The following table shows the result of the example program starting on page
139 for characterizing a diode. (Ag ilent Part number: 1901-1214, Manufacturer
Part number: MUR 160, Motoro la
®
C o.)
program result
To Next Page
Loading...
Need help?
General
