Chapter 4 Remote Interface Reference
SCPI Command Summary
63
4
SCPI Command Summary
This section summarizes the SCPI (
Standard Comman ds for Programmable
Instrum ents
) comm ands available to program the power supply over the
remote interface. Refer to the later sections in this chapter for more complete
details on each command.
Throughout this manual, the following conventions are used for SCPI
command syntax.
• Square brackets ([ ]) indicate optional keywords or parameters.
• Braces ({ }) enclose parameters within a command string.
• Triangle brackets (< >) indicate that you must substitute a value or a code
for the enclosed parameter.
• A vertical bar ( | ) separates one of two or more alternative param eters.
First-time SCP I users, see page 101.
SCPI
To Next Page
Loading...
Need help?
General
