Agilent Technologies E3633A Operating Manual

Chapter 4 Remote Interface Reference
Triggering Commands
80
• To ensure sy nchronization when the bus source is selected, send the *WAI
(wait) command. When the
*WAI command is executed, the power supply
waits for all pending operations to complete before executing any additional
commands. For example, the following command string guarantees that the
first trigger is accepted and is executed before the second trigger is
recognized.
TRIG:SOUR BUS;*TRG;*WAI;*TRG;*WAI
• You can use the *OPC? (operation complete query) command or the *OPC
(operation complete) command to signal when the operation is complete.
The
*OPC? comm and returns ‘‘1’’ to the output buffer when the operation
is c o mplete. Th e
*OPC command sets the ‘‘OPC’’ bit (bit 0) in the Standard
Event register when the operation is com plete.
Immediate Triggering
• To select the immediate trigger source, send the following command.
TRIG:SOUR IMM
• When the IMMediate is selected as a trigger source, an INITiate
command im m ed iately transfers the
VOLT:TRIG or CURR:TRIG value to
VOLT or CURR value. Any d elay is ignored.

Agilent Technologies E3633A Specifications

General

Brand	Agilent Technologies
Model	E3633A
Category	Power Supply
Language	English