Chapter 2 101
Front-Panel Key Reference
File
Dir Up Allows you to move up one directory level. If at the top
level,
Dir Up moves to the drive level, displaying the
available disk drives.
Key Access:
File, Save
Dir Select
Accesses the highlighted directory on your display.
Key Access:
File, Save
Load
Accesses menu keys that allow you to load analyzer setups, states,
traces, limits and corrections into the analyzer from a floppy (A:) drive
or internal flash (C:) drive.
Key Access:
File
Load Now
Executes the load function. When the load is complete,
the message XXXXXX file loaded (where XXXXXX is
the filename) will appear in the status line on your
display.
Key Access:
File, Load
Type
Allows you to select the type of file you want to load.
Setup Displays all setup files you may wish to
load (.SET). Setup files include a
complete set of instrument parameters
including traces, states, limits, and
corrections. Loading a setup restores
the analyzer (as closely as possible) to
all previous instrument settings at the
time of the save.
Key Access:
File, Load, Type
State
Displays all state files you may wish to
load (.STA). Loading a state restores
most settings to the previously saved
values.
Key Access:
File, Load, Type
Trace
Displays all trace files (.TRC) you may
wish to load. Traces can be loaded
individually or as a group. When a
trace is loaded, the state that existed
when that trace was saved is loaded
along with the trace. Also, the loaded
trace is placed in view mode.
Key Access:
File, Load, Type
To Next Page
Loading...
Need help?
General
