222 Chapter 2
Front-Panel Key Reference
Trace/View (Harmonic Distortion)
Trace/View (Harmonic Distortion)
If Harmonic Distortion is selected in the MEASURE menu, Trace/View
displays the following menu for the harmonic distortion measurement.
Harmonics Displays the harmonic number, frequency, and amplitude of the
harmonic found in the lower window on the analyzer display.
Key Access:
Measure, Harmonic Distortion, Trace/View
Harmonics
& THD
Displays the harmonic number, frequency, and amplitude of the
harmonic found in the lower window on the analyzer display, as well as
the total harmonic distortion (THD), which is shown as a percentage and
as a dB value.
Key Access:
Measure, Harmonic Distortion, Trace/View
Trace
Accesses menu keys that allow you to set how the trace information is
stored and displayed. Refer to “Trace/View” on page 214 for
Trace menu
key information.
Key Access:
Measure, Harmonic Distortion, Trace/View
To Next Page
Loading...
