Agilent Technologies E4402B - Measurement Setup - Spectrum Emission Mask (cont.)

150 Chapter 2
Front-Panel Key Reference
Meas Setup
Fail Mask Allows you to select from a menu of logic keys for fail
conditions between the measurement results and the
test limits.
Key Access:
Meas Setup, Offset/Limits, More
Absolute
Sets the limit test to show Fail if one
of the absolute spectrum emission
mask measurement results is larger
than the limit for
Abs Start and/or Abs
Stop
Relative
Sets the limit test to show Fail if one
of the relative spectrum emission mask
measurement results is larger than the
limit for
Rel Start and/or Rel Stop.
Abs AND Rel Sets the limit test to show Fail if one
of the absolute spectrum emission
mask measurement results is larger
than the limit for
Abs Start and Abs
Stop
and one of the relative spectrum
emission mask measurement results is
larger than the limit for
Rel Start and
Rel Stop.
Abs OR Rel Sets the limit test to show Fail if one
of the absolute spectrum emission
mask measurement results is larger
than the limit for
Abs Start and Abs
Stop
or one of the relative spectrum
emission mask measurement results is
larger than the limit for
Rel Start and
Rel Stop.
Key Access:
Meas Setup, Offset/Limits,
More, Fail Mask
Optimize
Ref Level
Sets the reference level and attenuator to optimum values based on the
signal present at the input.
Key Access:
Meas Setup