Agilent Technologies E4402B - Peak Search Function - Peak Table and Readout

168 Chapter 2
Front-Panel Key Reference
Peak Search
On Off Displays a list of up to ten signal peaks that is updated
at the end of each sweep. The peaks can be sorted in
order by descending amplitude or by ascending
frequency. Peaks above or below the display line can be
excluded from the table. The peak table function works
with trace 1 only.
Key Access:
Search, More, Peak Table
Peak Sort
Freq Amptd
Switches the peak table sorting routine between listing
the peaks in order by descending amplitude or by
ascending frequency.
Key Access:
Search, More, Peak Table
Peak Readout
Accesses the following Peak Readout menu keys:
Key Access:
Search, More, Peak Table
Normal
Shows up to ten signal peaks.
Key Access:
Search, More, Peak Table, Peak Readout
> Display Line
Shows only peaks above the display line.
Key Access:
Search, More, Peak Table, Peak Readout
< Display Line
Shows only peaks below the display line.
Key Access:
Search, More, Peak Table, Peak Readout