Agilent Technologies E5071C

Agilent MOI for DisplayPort Cable & Connector Compliance Tests
34
18. Select the Trace 2 in the From list.
19. Select the Trace 6 in the To list.
20. Click Copy.
21. Click Close.
22. Select Trace 6.
23. Open Parameters tab.
24. Click T42.
25. Select Trace 2.
26. Click Marker Search and select Δ Time.
27. Delta Time dialog box appear.
28. Check the Δ Time check box.
29. Select Target (Stop) to Trace 6 (T42).
30. Input Position (%) to 15.
31. Click OK.
6.2.3.2. Crosstalk Compensation
1. Select Trace 2.
2. Press Display > Equation Editor… > Enter an equation “Intra+= S31-S32”.
3. Check Equation Enabled check box.
4. Click Apply.
5. Click Close.
6. Select Trace 6.
7. Press Display > Equation Editor… > Enter an equation “Intra-= S42-S41”.
8. Check Equation Enabled check box.
9. Click Apply.
10. Click Close.