Agilent Technologies ESG-D Series - A2 DS1 Fluorescent Lamp

4-26
Assembly Replacement
A2DS1 Fluorescent Lamp
A2DS1 Fluorescent Lamp
Tools Required
• Phillips #0 screwdriver
Removal
1. Remove the display (A2). (Refer to "A2 Display" in this chapter.)
2. Loosen the screw (item 1) on the compartment door (item 2) of the display. Remove the door.
3. Remove the fluorescent lamp (A2DS1) from the compartment.
Replacement
1. Reverse the removal procedure. Ensure the lamp is correctly positioned in the reflective paper of the compartment.