7-8
Options and Accessories
Upgrade and Retrofit Kits
Upgrade and Retrofit Kits
This section describes the kits available for upgrading an existing signal generator feature and the kits
available to retrofit a feature to your signal generator. You can order these kits post-sales by requesting the
option number or the HP part number that is provided.
Firmware Upgrade Kit
This kit contains the latest firmware available for the signal generator. Disks are included in the kit in both
DOS and UNIX formats. Instructions for downloading the firmware are included. To order this kit, request
HP part number E4400-60046.
Firmware Upgrade Kit with Documentation
This kit contains the latest firmware available for the signal generator. Disks are provided in the kit in both
DOS and UNIX formats. Instructions for downloading the firmware are included. In addition, the standard
documentation set for the signal generator is provided. To order this kit, request HP part number E4400-
60055.
Option 1EH to Option UN3 Upgrade Kit (Option 001)
This kit contains all of the hardware and the instructions to upgrade a signal generator from Option 1EH to
Option UN3. Option 1EH is an I/Q baseband generator that is no longer available. Option UN3 contains
the same I/Q baseband generator capability as Option 1EH with the addition of DECT and TETRA digital
modulation formats, PRBS, 1 Mbyte of pattern RAM, and pre-modulation filtering. To order this kit,
request HP part number E4400-60040 or order Option 001.
Option 1EH to Option UN4 Upgrade Kit (Option 002)
This kit contains all of the hardware and the instructions to upgrade a signal generator from Option 1EH to
Option UN4. Option 1EH is an I/Q baseband generator that is no longer available. Option UN4 contains
the same I/Q baseband generator capability as Option 1EH with the addition of DECT and TETRA digital
modulation formats, PRBS, 8 Mbytes of pattern RAM, and pre-modulation filtering. To order this kit,
request HP part number E4400-60056 or order Option 002.