7-2
Options and Accessories
Signal Generator Options
Signal Generator Options
This section describes the options available for your signal generator. You can order these options with
your signal generator by ordering the option number shown, or you can order these options post-sales by
requesting the HP part number that is provided.
Front Handles (Option 1CN)
This kit contains two handles and the necessary hardware to attach the handles to the front of the signal
generator. Instructions for assembling the parts are included with the kit. To order this kit after receipt of
your signal generator, order HP part number 5063-9227.
Rack Mount Flanges without Handles (Option 1CM)
This kit contains two flanges and the necessary hardware to rack mount the signal generator in an HP
System II or System II Plus cabinet. Instructions for assembling the parts are included with the kit. To
order this kit after receipt of your signal generator, order HP part number 5063-9214.
Rack Mount Flanges with Handles (Option 1CP)
This kit contains two handles, two flanges, and the necessary hardware to rack mount the signal generator
in an HP System II or System II Plus cabinet. Instructions for assembling the parts are included with the
kit. To order this kit after receipt of your signal generator, order HP part number 5063-9221.
Three Year Warranty (Option W30)
If you order Option W30 at the point of sale, you will receive a service contract that extends your return-to-
HP repair benefits beyond the end of the warranty period for an additional two years. This additional
support is not available as a post-sales option.
I/Q Baseband Generator (Option UN3)
If you order Option UN3 at the point of sale, your signal generator will include an I/Q baseband generator
which makes the following digital modulation formats available: DECT, GSM, NADC, PDC, PHS, and
TETRA. Pre-modulation filtering selections are provided and PRBS capability with 1 Mbyte of pattern
RAM. In addition to providing the modulation formats for modulating data based on the specifications of
the standards, framing management capabilities are also provided.
To Next Page
Loading...
Need help?
General
