6-12
Error Messages
Command Error
-180 Macro error
This error, as well as errors
181 through 189, are generated when defining a macro or
executing a macro. This particular error message is used if the device cannot detect a
more specific error.
-181
Invalid outside macro definition
Indicates that a macro parameter placeholder ($<number) was encountered outside of a
macro definition.
-183
Invalid inside macro definition
Indicates that the program message unit sequence, sent with a *DDT or a *DMC
command, is syntactically invalid (see IEEE 488.2, 10.7.6.3).
-184
Macro parameter error
Indicates that a command inside the macro definition had the wrong number or type of
parameters.
To Next Page
Loading...
Need help?
General
