Agilent Technologies ESG-D Series User Manual

6-14
Error Messages
Execution Error
-211 Trigger ignored
Indicates that a GET, *TRG, or triggering signal was received and recognized by the
device, but was ignored because of device timing considerations. For example, the
device was not ready to respond.
-212
Arm ignored
Indicates that an arming signal was received and recognized by the device but was
ignored.
-213
Init ignored
Indicates that a request for a measurement initiation was ignored as another
measurement was already in progress.
-214
Trigger deadlock
Indicates that a trigger source for the initiation of a measurement is set to GET and a
subsequent measurement query is received. The measurement cannot begin until a
GET
is received, but the
GET would cause an INTERRUPTED error.
-215
Arm deadlock
Indicates that the arm source for the initiation of a measurement is set to GET and a
subsequent measurement query is received. The measurement cannot begin until a
GET
is received, but the
GET would cause an INTERRUPTED error.
-220
Parameter error
Indicates that a program data element related error has occurred. This particular error
message is used if the device cannot detect a more specific errors described for errors
221 through 229.
-221
Settings conflict
Indicates that a legal program data element was parsed but could not be executed due to
the current device state (see IEEE 488.2 11.5.1.1.5).
-222
Data out of range
Indicates that a legal program data element was parsed but could not be executed
because the interpreted value was outside the legal range defined by the device (see
IEEE 488.2 11.5.1.1.5).
-223
Too much data
Indicates that a legal program data element of block, expression or string type was
received that contained more data than the device could handle due to memory or related
device-specific requirements.

Agilent Technologies ESG-D Series Specifications

General

Brand	Agilent Technologies
Model	ESG-D Series
Category	Portable Generator
Language	English