6-17
Error Messages
Execution Error
-261 Math error in expression
Indicates that a syntactically legal expression program data element could not be
executed due to a math error. For example, a divide-by-zero was attempted. The
definition of a math error is device-specific.
-270
Macro error
Indicates that a macro-related execution error occurred. This error message is used when
the device cannot detect the more specific errors described for errors
271 through 279.
-271
Macro syntax error
Indicates that a syntactically legal macro program data sequence, written in accordance
with I
EEE 488.2, 10.7.2, could not be executed due to a syntax error within the macro
definition (see IEEE 488.2, 10.7.6.3).
-272
Macro execution error
Indicates that a syntactically legal macro program data sequence could not be executed
due to an error within the macro definition (see IEEE 488.2, 10.7.6.3).
-273
Illegal macro label
Indicates that the macro label defined in the *DMC command was a legal string syntax,
but could not be accepted by the device (see IEEE 488.2, 10.7.3 and 10.7.6.2). For
example, the label was too long, the same as a common command header, or contained
invalid header syntax.
-274
Macro parameter error
Indicates that the macro definition improperly used a macro parameter placeholder (see
IEEE 488.2, 10.7.3).
-275
Macro definition too long
Indicates that a syntactically legal macro program data sequence could not be executed
becau
se the string or block contents were too long for the device to handle (see IEEE
488.2, 10.7.6.1).
-276
Macro recursion error
Indicates that a syntactically legal macro program data sequence could not be executed
because the device found it to be recursive (see IEEE 488.2, 10.7.6.4).
-277
Macro redefinition not allowed
Indicates that the macro label defined in the
*DMC command could not be executed
because the macro label was already defined (see IEEE 488.2, 10.7.6.4).
To Next Page
Loading...
Need help?
General
