Agilent Technologies G7114B User Manual

Agilent InfinityLab LC Series VWD User Manual 122
8Test Functions
D/A Converter (DAC) Test
D/A Converter Test Evaluation
Test Evaluation
The noise on the step should be less than 3 µV.
Probable cause Suggested actions
1 Bad cable or grounding problem between
detector and external device.
Check or replace the cable.
2 Defective detector main board.
Please contact your Agilent service representa-
tive.

Agilent Technologies G7114B Specifications

General

Brand	Agilent Technologies
Model	G7114B
Category	Security Sensors
Language	English