Agilent InfinityLab LC Series VWD User Manual 126
9Maintenance
Warnings and Cautions
Warnings and Cautions
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety
risks.
When working with these substances observe appropriate safety
procedures (for example by wearing goggles, safety gloves and
protective clothing) as described in the material handling and safety
data sheet supplied by the vendor, and follow good laboratory practice.
The volume of substances should be reduced to the minimum required
for the analysis.
Do not operate the instrument in an explosive atmosphere.
Eye damage by detector light
Eye damage may result from directly viewing the UV-light produced by the
lamp of the optical system used in this product.
Always turn the lamp of the optical system off before removing it.
Electrical shock
Repair work at the module can lead to personal injuries, e.g. shock hazard,
when the cover is opened.
Do not remove the cover of the module.
Only certified persons are authorized to carry out repairs inside the
module.
To Next Page
Loading...
Need help?
General
