Agilent Technologies G7114B User Manual

Agilent InfinityLab LC Series VWD User Manual 42
3Using the Module
Set up the Detector with Agilent Open Lab ChemStation
Set up the Detector with Agilent Open Lab
ChemStation
The setup of the detector is shown with the Agilent OpenLab ChemStation
C.01.07 and Driver A.02.14.
Figure 10 ChemStation Method and Run Control (just detector is shown)
After successful load of the OpenLab ChemStation, you should see the module
as an active item in the graphical user interface (GUI).
NOTE
This section describes the detector settings only. For information on the Agilent
OpenLab ChemStation or other 1200 Infinity modules refer to the corresponding
documentation.

Agilent Technologies G7114B Specifications

General

Brand	Agilent Technologies
Model	G7114B
Category	Security Sensors
Language	English