Agilent Technologies G7114B User Manual

Agilent InfinityLab LC Series VWD User Manual 142
9Maintenance
Using the Cuvette Holder
1 Locate the cuvette holder on the desk. 2 Unscrew the bracket.
3 Insert the cuvette with the sample into the holder. The
clear side of the cuvette must be visible.
4 Replace the bracket and fix the cuvette.
Next Steps:
5 Install the cuvette holder in the instrument.
6 Perform your Wavelength Verification/Calibration (see “Wavelength Verification-Calibration” on page 110) to check the
correct position of the cuvette holder.
Light path
Clear side

Agilent Technologies G7114B Specifications

General

Brand	Agilent Technologies
Model	G7114B
Category	Security Sensors
Language	English