Agilent InfinityLab LC Series VWD User Manual 33
2 Site Requirements and Specifications
Performance Specifications
Instrument Control Lab Advisor B.02.06 or above
LC and CE Drivers A.02.11 or above
For details about supported software versions refer to the compatibility
matrix of your version of the LC and CE Drivers
Local Control Agilent Instant Pilot (G4208A) B.02.19 or above
Communication LAN, Controller-area network (CAN),
ERI: ready, start, stop and shut-down signals,
USB
GLP Early maintenance feedback (EMF) for continuous tracking of instrument
usage in terms of lamp burn time with user settable limits and feedback
messages. Electronic records of maintenance and errors. RFID for electron-
ics records of flow cell and UV lamp conditions (path length, volume, prod-
uct number, serial number, test passed, and usage). Verification of
wavelength accuracy with built-in holmium oxide filter.
Safety and mainte-
nance
Extensive diagnostics, error detection and display through Agilent Instant
Pilot and Agilent Lab Advisor software. Leak detection, safe leak handling,
leak output signal for shutdown of pumping system. Low voltages in major
maintenance areas. Tracking of flow cells and lamps with RFID (radio fre-
quency identification) tags
Table 4 Agilent 1290 Infinity II Variable Wavelength Detector (G7114B) Performance Specifica-
tions
Feature Specification
To Next Page
Loading...
Need help?
General
