Chapter 1: General Information
To determine whether the oscilloscope is under warranty
12
To determine whether the oscilloscope is under warranty
You can check your instrument’s warranty status at www.agilent.com. All you need is access to
the world wide web and the instrument’s model and serial numbers.
At the time this manual was published, the following steps brought you to the “Check Warranty
Status” web page on www.agilent.com.
1
Direct your web browser to www.agilent.com.
2 Select the “Products & Services” heading.
3 Select “Test & Measurement Equipment.”
4 Select “Repair, Calibration & Applications Services.”
5 Select “Warranty & Service Agreements.”
6 Select “Check Warranty Status.”
7 Type in your oscilloscope’s model number and serial number.
8 Select “Submit.” The warranty status of your oscilloscope will be displayed.
If these navigation steps no longer work because of changes to the www.agilent.com website,
then search for “warranty status” at www.agilent.com to find the “Check Warranty Status” web
page.
To Next Page
Loading...
Need help?
General
