Agilent Technologies N1914a User Manual

10 Specifications and Characteristics
222 Agilent N1913/1914A EPM Series Power Meters User’s Guide
Table 1 0 -2 Zero Set (Internal and External) for U2000 Series
Power sensor Range Zero Set (Internal) Zero Set (External)
U2000/1/2A –60 dBm to –35 dBm ±1.5 nW ±600 pW
–38 dBm to –15 dBm ±2 nW ±1.5 nW
–20 dBm to –9 dBm ±12 nW ±10 nW
–11 dBm to –5 dBm ±2 µW ±500 nW
–7 dBm to 15 dBm ±4 µW ±1 µW
10 dBm to 20 dBm ±6 µW ±5 µW
U2004A –60 dBm to –35 dBm ±2.8 nW ±600 pW
–38 dBm to –15 dBm ±3 nW ±1.5 nW
–20 dBm to –9 dBm ±12 nW ±10 nW
–11 dBm to –5 dBm ±2 µW ±500 nW
–7 dBm to 15 dBm ±4 µW ±1 µW
10 dBm to 20 dBm ±6 µW ±5 µW
U2000/1/2H –50 dBm to –25 dBm ±15 nW ±8 nW
–28 dBm to –5 dBm ±20 nW ±20 nW
–10 dBm to 1 dBm ±120 nW ±100 nW
–1 dBm to 5 dBm ±20 µW ±20 µW
3 dBm to 25 dBm ±40 µW ±30 µW
20 dBm to 30 dBm ±60 µW ±60 µW
U2000/1B –30 dBm to –5 dBm ±1.8 µW ±800 nW
–8 dBm to 15 dBm ±2 µW ±
2 µW
10 dBm to 21 dBm ±12 µW ±10 µW
19 dBm to 25 dBm ±2 mW ±1 mW
23 dBm to 44 dBm ±4 mW ±2 mW
NOTE
The Zero Set specifications are only applicable to U2000 Series USB power sensors with
serial prefix as shown below:
U2000A Serial prefix MY480/SG480 and above
U2001A Serial prefix MY481/SG481 and above
U2002A Serial prefix MY482/SG482 and above
U2004A Serial prefix MY484/SG484 and above
For power sensors with earlier prefixes, refer to the Agilent U2000 Series USB Power
Sensors Operating and Service Guide.

Agilent Technologies N1914a Specifications

General

Brand	Agilent Technologies
Model	N1914a
Category	Measuring Instruments
Language	English