5Key Reference
130 N9342C/43C/44C User’s Guide
•Resolution
Access the associated Resolution submenu.
When the measurement suffix is W or %, this
parameter represents the number of significant
digits. When the measurement suffix is dB or
dBm, 1 through 4 represents 1, 0.1, 0.01, and
0.001 dB respectively.
The default value is 3.
• Disp Mode
Change the display mode between Meter and
Chart.
The default mode is Meter.
•Chart View
Access the Chart View submenu. This soft key is
disabled when the measurement is in process or
if the display mode is set to Meter.
This submenu is used to view the measurement
chart.
• Home
View the first 21 points of current measurement
chart.
• End
View the latest 21 points of current
measurement chart.
• Prev
View the previous points of the chart.
• Next
View the next points of the chart.
• Continue/Pause
Continues or pauses the current measurement.
When the measurement is in process, this
softkey is displayed as “Pause”; when the
measurement is paused, the softkey is displayed
as “Continue”.
To Next Page
Loading...
