Maintenance and Spare Parts
Agilent Vapor Generation Accessory VGA 77 and VGA 77P User’s Guide 79
Spare Parts
NOTE
Use only Agilent supplied parts unless otherwise indicated.
The following spare parts are available from Agilent for your VGA 77:
Module for AA includes reagent module, tubing and connectors 9910062100
Module for ICP includes module, tubing and connectors 9910062200
Absorption cell for AA. 2 cells, separator to cell tubing
(fluoro-elastomer)
9910040000
Flow through mercury cell kit. Includes cell and separator to cell
tubing (fluoro-elastomer)
9910040700
Cell holder for Mark 7 burner 110654990
Cell holder mounting kit for Mark VI burner 110375990
Cell holder for Mark V burner mount 110317790
Cell holder mounting kit for Mark V burner 410117300
Tubing kit for AA 9910061900
Tubing kit for ICP 9910061800
Gas/liquid separator kit for AA includes separator and rubber
mounting strap
9910071100
Gas/liquid separator kit for ICP includes separator and rubber
mounting strap
9910062000
Fuse, T0.2AH0250V IEC sheet 5, 5 x 20 mm (0.8 in.) 1910009300
Pump tubes for acid/reductant, black/black (pack of 12) 3710027200
Pump tubes for sample, purple/black (pack of 12) 3710027300
Polyethylene capillary tubing 1 m (3.3 ft) lengths. 2410020500
Fluoro-elastomer tubing, small. 1 m (3.3 ft) lengths.
3710026800
Fluoro-elastomer tubing, AA. 0.66 m (2.2 ft) lengths, 2.8 mm
(0.110 in.) ID.
3710026390
Drain tubing from gas-liquid separator (2 meter length required)
2 m (6.6 ft) length, 10 mm (0.4 in.) ID.
3710009200
Reagent vessel, 500 mL 6610011600
Replacement drip tray 7010017200
To Next Page
Loading...
Need help?
General
