UG-MD16E-EN (V1.3-190708)
MD-16E
Mixer Reference manual
Repair and Maintenance
This equipment belongs to precision electronic products, requiring a special maintenance and
repair method. In order to avoid equipment spoilage, personal injury and /or add potential safety
hazards, all the maintenance and repair of the equipment must be undertaken by the authorized
service station or distributor. Our company will not take any liability for any hurt, impairment or
mutilation caused by unauthorized repair conducted by the equipment client, owner or user.
FCC statement
Note: This machine conforms to the limitation for digital equipment of Category B as
specified in Part 15 of FCC Rules after testing.
These limitations are specified for providing rational protection, preventing any harmful interference
caused to the dwelling house facilities. This machine will produce, use and radiate radio frequency
energy, failure to follow the directions for installation and operation of the machine may cause harmful
interference to the telecommunication. But anyhow, we can not eliminate the possibility of any
interference generated in special installation conditions. If the machine indeed brings harmful
interference to radio or television reception (can be determined by turn on or turn off the machine),
users are encouraged to try one or more of the following measures to rectify this interference:
• Change the orientation of the receiving antenna or resetting.
• Increase the distance between the equipment and the receiver.
• Separate the power outlet used by the equipment and the receptacle used by the receiver.
• Consult the dealer or experienced radio or TV technician for help.
RoHS Statement
This digital mixer complies with the 2011/65/EU Command on Restriction of the Use of Certain
Hazardous Substances in Electrical and Electronic Equipment ( RoHS ).
This digital mixer complies with " China RoHS " standard. The table below is suitable for the
products used in China and other regions:
Toxic or hazardous Substances and Elements
○
: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit
requirement in SJ/T11363_2006.
×: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above
the limit requirement in SJ/T11363_2006.
To Next Page
Loading...