UG-MD16E-EN (V1.3-190708)
MD-16E
Mixer Reference manual
2.9. Power standby and recovery
If you do not use this mixer for a while, but want to quickly enter the working state when you need it, you
can let the device enter the standby state to save energy.
The mixer is at
Normal working
condition
( The power light
is always on )
Long press the button
on the panel
( The power light
flashes quickly )
Click the button on
the panel
( The power light
flashes quickly )
Mixer enter
Power standby
( The power light is
blinking slowly )
The mixer is at
Power standby
( The power light is
blinking slowly )
Click the button
on the panel
Mixer recovery
Normal working
condition
( The power light is
always on )
2.10. Programmable central control remote operation
Using the device's network port or WIFI hotspot, this digital mixer
can accept remote control commands from the center console. Through
the centralized control of the programmable central control unit, you
can quickly and efficiently control the main parameters of the MD-16E
digital mixer, such as input/output volume and mute control, as well as
scene calls, and so on.
The easy-to-understand ASCII command language, flexible and
extensible syntax structure, direct parameter assignment or incremental/
decrement assignment, can also read back the current parameter values of the mixer. For detailed
communication protocols and requirements, see "AIMIX Digital Mixer Central Control Communication
Protocol".
To Next Page
Loading...