- 10 -
PREPARATION
Connecting with a mobile device
Flow of the settings
The following settings are needed to establish a connection link with a mobile device.
Connect the station with Wi-Fi. (ĺ P. 11)
Register a mobile device to the station. (ĺ P. 17)
Connect a mobile device with the Wi-Fi.
(See the instruction manual of each mobile device.)
NOTE:
• Prepare a commercially available Wi-Fi router for connecting the system to the internet. A Wi-Fi router is not included with this product.
• The residential/tenant station uses radio waves in the 2.4 GHz band.
• Using a microwave oven may affect Wi-Fi communication in 2.4 GHz band.
• The channel 1 to 11 can be used.
• The bandwidth required for connecting to Internet is as follows (when only the station is connected to Wi-Fi):
Minimum Internet connection bandwidth
Video quality In upload (Mbps) In download (Mbps)
Minimum 0.3 0.2
Medium Low 0.5 0.2
Medium High 0.8 0.2
Maximum 1.3 0.2
• Be sure to set the current date and time on the station in advance. If the set time differs from the current time for more than 1 month, the
Aiphone app may not work correctly.
• Up to 8 mobile devices can be registered to the station.
• Register a wireless LAN router to only one GT-1C7W(-L) in the same residence/tenant.
Features:
• A call and video from the entrance station or guard station can be received with a mobile device.
Communication between the entrance station or guard station and a mobile device is also possible.
• Emergency alarm can be received with a mobile device.
• Recordings on the station can be played and viewed with a mobile device.
Checking the signal strength:
The connection status between the station and the network can be checked on the MENU screen.
When the connection settings have been completed, confirm whether the connection is successful.
Weak
Out of range
Not connected to
the server
The Wi-Fi function
is disabled.
Strong