- 7 -
PREPARATION
Initial set-up
Setting the current date and time
When the station is powered up for the ¿ rst time, set the
current date and time.
1 If the monitor is oႇ , tap the screen to turn on the
LANGUAGE 1/2 screen.
2 Tap desired display language, then tap
9
.
3 Tap
9
to set the date and time.
4 Tap the proper time zone from the list of time
zones.
* Tap
>
or
<
to change the pages of the list.
5 Tap
9
to apply changes.
The CURRENT TIME screen is shown.
6 Set the day, month, year, hour, and minute
individually by taping
or .
7 When the setting has ¿ nished, tap
9
.
■ To correct date and time
Correct the current date and time any time by following the
procedure below.
1 From the MENU screen, tap
ĺ
Date/Time
ĺ
Current Time
.
2 Set the day, month, year, hour, and minute
individually by tapping
or .
3 When the setting has ¿ nished, tap
9
.
NOTE:
• A maximum of 60 seconds time gain/loss can occur in the
displayed time over a month. It is recommended to correct the
time periodically.
• When the station is connected to the internet, the date and time
are automatically corrected.
• If there is no power supply for 15 minutes or more, the date and
time return to default.
Changing the display language
The display language for the screen is set to English by
default. First, select a language as follows.
1 From the MENU screen, tap
ĺ
Language
.
The LANGUAGE screen is shown.
2 Tap desired language, then tap
9
.
* Tap
>
or
<
to change the pages of the list.
Day Month Year Hour Minute