AirLive N.MINI - WDS Settings

4. Web Configuration
29
AirLive N.MINI User’s Manual
WDS.
To use WDS function:
1. The APs must support WDS function.
2. To set the same SSID (Network name).
3. The channel must be set to the same on the APs.
4. To set the same Wireless MAC address (BSSID) on the APs.
5. To set same security (WEP or WPA) on the APs.
Note
To setup WDS must use the same wireless products (the same model will
be better); due to different wireless products might support different WDS
settings.
Thus, it is suggested that to use the same wireless products that support
WDS function.