Grease all articulated joints equipped with greaser (or
predisposition for greaser) at least every month.
At least once a month, using a spatula or a brush, lubricate
the sliding guides (Figure 7-5) of:
A. The sliding blocks of the extensible structure on the
chassis
B. The sliding blocks of the extensible structure under the
platform
C. The counter-pressure sliding blocks of the mobile platform
At least once a month lubricate:
D. The support pins of the steering wheels equipped with
greaser
Moreover, remember to grease all the points above
mentioned:
▪ After washing the machine.
▪ Before using the machine again after a long time-interval.
▪ After using the machine in adverse environmental
conditions (high humidity levels; presence of dust; coastal
areas, etc).
Before greasing, clean thoroughly using a wet cloth. Grease
all points indicated in the picture aside (and all articulated
joints equipped with greaser) with grease type:
ESSO BEACON-EP2, or similar.
To Next Page
Loading...
