35
LITE THERMOSTATS
To configure a Lite thermostat, follow these steps:
Wired Lite thermostat
- Perform all the appropriate connections.
- Connect the thermostat.
- Press the LED to confirm the association.
- The number of the zone which associates with the thermostat is the lowest free available number.
- If the association is correct, the LED will flash green 5 times.
Wireless Lite thermostat
- Open the wireless association channel of the main board, wait a few seconds so the zone module, which will be
associated to the thermostat, opens its wireless association channel (the wireless opening LED must be solid red).
To Next Page
Loading...
