All Airzone systems must be connected to internet to offer technical support.
It is only necessary to connect one Webserver Cloud per installation (control of up to 32 systems).
Assembly
The Webserver is integrated into the automation bus of the Control board
(Fig. 52). It has a 5-pin terminal. Disconnect the terminal and fit the connector.
Connection
(Fig. 53), use the 2-pin terminal to
connect the Webserver Cloud to the domotic bus of the main board. Use the proper
cable: shielded twisted pair 2 wired: 2x0.22 mm
2
(AWG 24 2 wired). Attach the wires
with the terminal screws following the color code (Fig. 54).
To Next Page
Loading...