Akai MPC1000 User Manual

Connecting MPC1000 to External Audio/MIDI device
The diagram below demonstrates how you can connect the MPC1000 to an external Audio/MIDI device.
Please note that this is one example, so, when you actually connect your devices, refer to the device’s operator's
manual.
Note: When you connect devices, make sure the power is turned off.
Introduction
-4-

Akai MPC1000 Specifications

General

Pads	16 velocity and pressure-sensitive pads
Polyphony	32 voices
Sampling Frequency	44.1 kHz
Bit Depth	16-bit
Power	12V DC
Memory	16 MB (expandable to 128 MB)
Storage	CompactFlash card slot
Sequencer Resolution	96 PPQN
Sample Format	WAV
Filter	2-pole resonant filter per voice
Effects	2 stereo effects processors
Display	240x64 backlit LCD
Inputs	2 x 1/4" line inputs
MIDI	In, Out, Thru
USB	USB 1.1
Sequencer	64-track